SATO CL408 Programming Reference Manual page 27

COMMAND QUICK REFERENCE
INSTRUCTION
&S,aa,bbbb,cccc
A(space)Z
*a,bbb
*a
@,nn...n
A3H-aaaa-Vbbbb
AX
E/Pro Programming Reference
Unit 3: Code Quick Reference
Form Overlay, Store. Stores a label image in Expanded Memory.
aa = Storage number (00 to 99)
bbbb = Horizontal size of window to be stored (50 to Hmax)
cccc = Vertical size of window to be stored (50 to Vmax)
Form Feed. Feeds a blank tag or label.
Clear Memory Card. Stores a label image in Expanded Memory.
a = Memory section to be cleared.
G: SATO graphics file (001 to 999)
P: PCX graphics file (001 to 999)
F: Stored formats (001 to 999)
O: TrueType fonts, memory card (001 to 009)
R: BMP graphic file (001 to 999)
bbb = BMP graphic file (001 to 999)
System Clear. Stores a label image in Expanded Memory for the CT400/410 printers.
a = Clear Item
(blank): Single item receive, edit buffer
Offline/Pause. Signals the printer to go offline after upon job completion.
nn...n = Optional message to be displayed on the LCD (max 32 characters).
Base Reference Point. Establishes a new base reference point position for the current
label. Units of measurement are dots.
- = Optional character. If included, will shift reference point in negative
direction.
aaaa = Horizontal reference point
bbbb = Vertical reference point
Print Area Enlargement. This command sets the printer to the Expanded print length (14
inches). <ESC>EX0 is the recommended replacement.
DESCRIPTION
T: Foreign character registration area
&: Form overlay
X: All clear
3-3
PN: 9001096E