SATO CL408 Programming Reference Manual page 179

RARP
FUNCTION
Specifies if RARP is disabled or enabled. When enabled, RARP will automatically obtain IP
address in start up.
FORMAT
<ESC>WM
Place this command between <ESC>A start code and <ESC>Z stop code.
EXAMPLE
<ESC>A
<ESC>WM1
<ESC>Z
OUTPUT
This command does not result in printer output.
Setting can be printed on the factory test print.
NOTES You cannot use this command in combination with other commands.
The set parameter will become valid after rebooting.
Default setting is as follows:
IP Address: 1 (RARP Enabled)
WIRELESS LAN
FUNCTION Sets up wireless LAN.
FORMAT
<ESC>WZ
E/Pro Programming Reference
Unit 4: Standard Command Codes
a = RARP
0: Disabled
1: Enabled
Format 1 To set up all items
<ESC>WZa,b,c,dddddddddddd,eeeeeeeeeeee,ffffffffffff,gggg,hhh,iii,j,k
,. . . . . zzzzzzzz
a = Item number:
F: All items
D: Default settings
b . . . z = Set value (as shown in the rows below)
Format 2 To set up specific items
<ESC>WZaa,b
a = Item number: Valid range: 1-25
b = Set value: See table below for more detail.
4-127
PN: 9001096E