SATO CL408 Programming Reference Manual page 84

MEDIA SIZE (MM)
FUNCTION
Specifies the media size in millimeters.
FORMAT
<ESC>A1aabbbccc
EXAMPLE <A>
<A1>0T060042
<Z>
<A>
<l1>
<V>100<H>200<P>2<L>0304<XS>ABCDE
<Q>
<Z>
OUTPUT
NOTES 1. For specifying the media size, include the size of backing paper.
2. If the media setting on the printer side and [Media type] are not equal, a command error will
occur
3. If [Media size check] in expansion setting is enabled, the validity of setting on the printer
side, and the setting specified by the Media Size <A1> command will be checked. If their
settings are not equal, a pitch size error will occur.
4. If a pitch size error occurs, the data received by the printer will be cleared. Check the
Media Size <A1> command again and send the print data. The Media Size <A1> command
can be omitted, but this command is required when printing multiple media.
5. When the use of sensor is prohibited, this command will be valid whether you select tag or
label for [Media type].
E/Pro Programming Reference
Unit 4: Standard Command Codes
a = Media type: OT: Tag (Center hole tag, Side hole tag, Notched tag, I-
mark tag, Not sensor)
Media type: OL: Label (I-mark label, Gap label, Not sensor)
b = Height of media in mm: See the table below.
c = Width of media in mm: See the table below.
[Validity]
Media type
Model
TG308 Tag
Label
TG312 Tag
Label
Print area
Height of media in mm
compatibility
Standard 025 to 300
Expansion 025 to 300
Standard 019 to 300
Expansion 019 to 300
Standard 025 to 240
Expansion 025 to 240
Standard 019 to 240
Expansion 019 to 240
4-32
Width of media in mm
032 to 080
032 to 100
025 to 080
025 to 100
032 to 080
032 to 100
025 to 080
025 to 100
PN: 9001096E