SATO CL408 Programming Reference Manual page 96

STORE 16X16 DOTS EXTERNAL CHARACTER
FUNCTION
Register external character of 16x16 dots in memory card.
FORMAT
<ESC>T1abbn~n
EXAMPLE
OUTPUT
NOTES
E/Pro Programming Reference
Unit 4: Standard Command Codes
a =
Data type =
H: Hex character
B: Binary code
b = Registration font code address
<ESC>JIS
H: "21" to "7F" Up to 95 registries
B: 21H to 7FH Up to 95 registries
<ESC>Shift JIS
H: "40" to "9E" Up to 95 registries
B: 40H to 9EH Up to 95 registries
n = External character data
<ESC>A
<ESC>CC1
<ESC>T1H2100FF00FF
<ESC>Z
External file 16 x 16
1. Existing data can be overwritten.
2. The Card Slot <ESC>CC command must be sent prior to this
command.
3. An error may occur due to capacity shortage when this command
and other commands related to registration are used at the same time.
In such a case, you need to store the data on another card or replace
the card with a card of larger capacity.
4. Data will be out in the order as shown in the output illustration
above.
4-44
3C0000FF
D1 D2
D3 D4
D5 D6
D31 D32
PN: 9001096E