Table of Contents
Advertisement
[Printing] Menu
The following settings are available in the [Printing] menu:
[Label Length]
Set the length of the media.
The setting range of the label length is 1 to 8000 dots.
•
1 dot length is 0.125 mm (0.0049").
•
Set the label size to a value that includes the liner.
[Label Width]
Set the width of the media.
The setting range of the label width is 1 to 832 dots.
•
1 dot length is 0.125 mm (0.0049").
•
Set the label size to a value that includes the liner.
[Auto Measure]
The product automatically measures the length of the media.
The measured length of the media will be automatically saved in [Label Length].
The Auto Measure function can be performed when [Sensor Type] is set [Gap] or [I-Mark].
The setting procedure of the label length using the Auto Measure function is as follows:
142
[Auto Measure]
Advertisement
Table of Contents
