Table of Contents
Advertisement
Chapter 4. Applying Effects to the Sound (Effects)
16. Space-D (Add Transparent Depth)
This is a type of chorus, but unlike a conventional chorus, it does not create a sense of modulation.
Screen
Parameter
PRE DELAY
(Pre Delay Time)
DEPTH
PHASE
RATE
LOW GAIN
HIGH GAIN
BALANCE
(Effect Balance)
OUTPUT LEVEL
* 1: 16 (16th note), 8T (8th note triplets), 16. (dotted 16th note), 8 (8th note), 4T (quarter note triplets), 8. (dotted 8th note), 4 (quarter note), 2T (half note
triplets), 4. (dotted quarter note), 2 (half note), 1T (whole note triplets), 2. (dotted half note), 1 (whole note)
* 2: 2M (2 measures), 3M (3 measures), 4M (4 measures), 8M (8 measures), 16M (16 measures)
17. Tetra Chorus (Layer Chorus Sounds to Add Spaciousness)
This effect layers four chorus sounds to produce even more depth and spaciousness than a conventional chorus.
Screen
Parameter
PRE DELAY
(Pre Delay Time)
DEPTH
PRE DELAY DEVI
(Pre Delay Deviation)
RATE
DEPTH DEVI
(Depth Deviation)
PAN DEVI
BALANCE
(Effect Balance)
OUTPUT LEVEL
* 1: 16 (16th note), 8T (8th note triplets), 16. (dotted 16th note), 8 (8th note), 4T (quarter note triplets), 8. (dotted 8th note), 4 (quarter note), 2T (half note
triplets), 4. (dotted quarter note), 2 (half note), 1T (whole note triplets), 2. (dotted half note), 1 (whole note)
* 2: 2M (2 measures), 3M (3 measures), 4M (4 measures), 8M (8 measures), 16M (16 measures)
52
Explanation
Specifies the time from the original sound until the chorus sound is
heard.
Specifies the depth of modulation.
Adjusts the spread of the sound.As this value is increased, the
sound will have a broader left/right spread.
Specifies the rate of modulation. If a note value or measure is select-
ed as the value of this parameter, the Rate will synchronize with the
BPM of the pattern at intervals of the specified note value or mea-
sure.
Adjusts the boost or cut of the low frequency range.
Adjusts the boost or cut of the high frequency range.
Adjusts the volume balance between the original sound and the
chorus sound.With a setting of "0," no chorus sound will be output.
Specifies the output volume from the Space-D effect.
Explanation
Specifies the time from the original sound until when the
chorus sound is heard.
Specifies the depth of modulation.
Adjusts the difference in pre delay between each of the cho-
rus sounds.
Specifies the rate of modulation. If a note value or measure
is selected as the value of this parameter, the Rate will syn-
chronize with the BPM of the pattern at intervals of the spec-
ified note value or measure.
Adjusts the difference in modulation depth between each of
the chorus sounds.
Adjusts the pan difference between each chorus sound.As
this value is increased, the sound will have a greater left/
right spread.
Specifies the volume balance between the original sound
and the chorus sound.With a setting of "0," no chorus sound
will be output.
Specifies the output volume from the Tetra Chorus effect.
Value
0.0–100
0–127
Y
0–180
0.1–10.0 (Hz), notes
X
(*1), measures (*2)
-15–15
-15–15
0–100 (%)
0–127
Value
0.0–100
0–127
0–20
0.1–10.0 (Hz), notes (*1),
X
measures (*2)
-20–20
0–20
Y
0–100 (%)
0–127
Advertisement
Table of Contents
