Roland Groovebox D2 Owner's Manual page 50

Hide thumbs Also See for Groovebox D2:
Table of Contents

Advertisement

Chapter 4. Applying Effects to the Sound (Effects)
12. Slicer (Apply Successive Cuts to the Sound)
fig.MFXSLI
By applying successive cuts to the sound, this effect turns a conventional sound into a sound that appears to be played as a
backing phrase. This is especially effective when applied to sustain-type sounds.
Screen
Parameter
TIMING PATTERN
ACCENT PATTERN
ACCENT LEVEL
ATTACK
OUTPUT LEVEL
RATE
13. Tremolo (Cyclic Changes in Volume)
fig.MFXTRM
This effect cyclically modulates the volume to create tremolo.
Screen
Parameter
LFO TYPE
DEPTH
LOW GAIN
RATE
HIGH GAIN
OUTPUT LEVEL
* 1: 16 (16th note), 8T (8th note triplets), 16. (dotted 16th note), 8 (8th note), 4T (quarter note triplets), 8. (dotted 8th note), 4 (quarter note), 2T (half note
triplets), 4. (dotted quarter note), 2 (half note), 1T (whole note triplets), 2. (dotted half note), 1 (whole note)
* 2: 2M (2 measures), 3M (3 measures), 4M (4 measures), 8M (8 measures), 16M (16 measures)
50
Explanation
Select a pattern to specify the timing at which the sound will be
cut.
Specifies the location of the accents.
Adjusts the volume of the accents. As this setting is increased,
the accent will be more pronounced.
Adjusts the attack speed of the sound. As this setting is in-
creased, the attack will become faster.
Adjusts the output volume from the Slicer effect.
Determines the note value unit which will be cut.
Explanation
Determines the waveform that will be used to modulate the
sound.
Specifies the depth of modulation.
Adjusts the boost or cut of the low frequency range.
Specifies the frequency of modulation. If a note value or measure
is selected as the value of this parameter, the Rate will synchronize
with the BPM of the pattern at intervals of the specified note value
or measure.
Adjusts the boost or cut of the high frequency range.
Specifies the output volume of the Tremolo effect.
Value
34 types
X
16 types
0–127
Y
1–10
0–127
4, 2, 1
Value
TRI, TRP, SIN,
SAW1, SAW2, SQR
0–127
Y
-15–15
0.1–10.0 (Hz), notes
X
(*1), measures (*2)
-15–15
0–127

Advertisement

Table of Contents
loading

Table of Contents