Table of Contents
Advertisement
Chapter 4. Applying Effects to the Sound (Effects)
7. Noise Generator (Add Various Types of Noise)
fig.MFXNSE
In addition to a Lo-Fi effect, this effect also generates various types of noise such as hum, pink noise, and disk noise.
Screen
Parameter
NOISE TYPE
NOISE LEVEL
NOISE FILTER
LO-FI LEVEL
OUTPUT PAN
OUTPUT LEVEL
For each setting, the type(s) of noise marked by " " will be generated.
NOISE TYPE
Hum noise (50Hz)
Hum noise (60Hz)
Pink noise
Disc noise (45 RPM)
Disc noise (33 RPM)
Disc noise generated at random
8. Radio Tuning (Simulate a Radio Being Tuned)
fig.MFXRTN
This effect simulates the sound of a radio being tuned.
Screen
Parameter
RADIO DETUNE
NOISE LEVEL
LOW GAIN
HIGH GAIN
OUTPUT
OUTPUT LEVEL
48
Explanation
Determines the type of noise(s) that will be generated.
Specifies the volume of the noise.
Adjusts the tone of the noise. If you do not wish to filter the
noise, select "BYPASS."
Increasing this setting will make the original sound rougher.
Specifies the stereo location of the sound output from the Noise
Generator.
Specifies the output volume of the Noise Generator effect.
1
2
3
4
5
6
Explanation
Specifies the frequency being tuned.
Specifies the volume of the tuning noise.
Adjusts the boost or cut of the low frequency range.
Adjusts the boost or cut of the high frequency range.
Specifies how the sound will be output. With a setting of "MONO,"
the output sound will be monaural.
Specifies the output volume of the Radio Tuning effect.
7
8
9
10
11
12
Value
1–18
0–127
200 (Hz)–8.00 (kHz),
BYPASS
0–127
L64–R63
0–127
13
14
15
16
17
18
Value
0–127
0–127
-15–15
-15–15
MONO, STEREO
0–127
Y
X
X
Y
Advertisement
Table of Contents
