Table of Contents
Advertisement
Chapter 4. Applying Effects to the Sound (Effects)
3. Enhancer (Add Sparkle to the Sound)
fig.MFXENH
By controlling the overtones of the high frequency range, this effect adds sparkle to the sound, giving it more definition.
Use this effect when you want to make a specific sound stand out from the rest of the ensemble, or to give it greater definition.
Screen
Parameter
SENS
(Sensitivity)
MIX
(Mix Level)
LOW GAIN
HIGH GAIN
OUTPUT LEVEL
4. Overdrive (Distort the Sound Mildly)
fig.MFXodr
This simulates the soft distortion that occurs when you raise the gain of a vacuum tube amp. The effect also contains an amp
simulator, and produces the natural distortion that is created by sounds played through a guitar amp. It is suitable for use with
guitar and synth-bass sounds.
Screen
Parameter
INPUT LEVEL
DRIVE
AMP TYPE
OUTPUT PAN
OUTPUT LEVEL
46
Explanation
Adjusts the depth of the enhancer effect.
Determines the proportion at which the overtones generated by
the enhancer will be mixed with the original sound.
Adjusts the volume of the low frequency range.
Adjusts the volume of the high frequency range.
Specifies the volume of the output from the Enhancer effect.
Explanation
Adjusts the level of the input signal.
Adjusts the depth of distortion. This will also af-
fect the volume.
Selection for the type of guitar amp.
Specifies the stereo location of the sound that is
output from the Overdrive effect.
Specifies the output volume from the Overdrive
effect.
Value
0–127
0–127
-15–15
-15–15
0–127
Value
0–127
0–127
SMALL (small amp),
BUILTIN (built-in type amp),
2STACK (large double amp stack),
3STACK (large triple amp stack)
L64–R63
0–127
Y
X
Y
X
Advertisement
Table of Contents
