Roland Groovebox D2 Owner's Manual page 47

5. Distortion (Distort the Sound Severely)
fig.MFXDST
This effect produces a more severe distortion than the Overdrive effect. It also contains an amp simulator, and produces the
natural sound of a guitar amp.
Screen Parameter
INPUT LEVEL
DRIVE
AMP TYPE
OUTPUT PAN
OUTPUT LEVEL
6. Lo-Fi (Simulate a "Lo-Fidelity" Sound)
fig.MFXNSE
This effect intentionally degrades the audio quality to simulate a Lo-Fi sound. It is particularly effective on drums.
Screen Parameter
BIT DOWN
SAMPLE RATE DOWN
POST GAIN
LOW GAIN
HIGH GAIN
OUTPUT
OUTPUT LEVEL
Chapter 4. Applying Effects to the Sound (Effects)
Explanation
Adjusts the level of the input signal.
Adjusts the depth of distortion. This will also af-
fect the volume.
Determines the type of guitar amp.
Specifies the stereo location of the sound that is
output from the Distortion effect.
Specifies the output volume from the Distortion
effect.
Explanation
This setting lowers the audio quality. The audio quality will
worsen as this setting is increased.
This coarsens the output signal. The sound will become
coarser as this setting is lowered.
Adjusts the output signal.
Adjusts the boost or cut applied to the low frequency range.
Adjusts the boost or cut applied to the high frequency range.
Specifies how the sound will be output. With a setting of
"MONO," the output sound will be monaural.
Specifies the output volume from the Lo-Fi effect.
Value
0–127
0–127
SMALL (small amp),
BUILTIN (built-in type amp),
2STACK (large double amp stack),
3STACK (large triple amp stack)
L64–R63
0–127
Value
0–7
32, 16, 8, 4
0, +6, +12, +18
-15–15
-15–15
MONO, STEREO
0–127
Y
X
X
Y
47