D Transmitting An Individual Call - Icom IC-41S Instruction Manual

t Push [CH Up] or [CH Down] to set the desired code.
• Select "❋" when group code is set.
y Push
to set the digit and the editable
(TX Code CH)
digit move to right automatically.
u Repeat step t and y to input all allowed digits.
i After setting the last digit, push
the code and return to the TX code channel selection
mode.
o Push [PTT] to transmit to the selected TX code channel,

D Transmitting an individual call

➥ Push [Top]
to set
(TX Code CH)
SELCALL OPERATION
or push
(TX Code CH)
channel and return to the stand-by mode.
Appears
Transmitting
NOTE: The TX code editable digit can only be set/changed
with the optional CS-41S
CLONING SOFTWARE
to enter the function mode, then push
(Function)
and hold for 2 sec. to transmit.
(Call)
Appears
Transmitting
7
to set the selected TX code
.
7
27