D Tx Code Number Edit - Icom IC-41S Instruction Manual

7
SELCALL OPERATION
r Push [PTT] to transmit to the selected TX code channel,
or push
(TX Code CH)
channel and return to the stand-by mode.
Appears
✔ CONVENIENT!
The TX code channel name can be assigned to the all 32 TX
code channel via the optional CS-41S
The TX code channel name allows you to easy to select the
channel, find the channel user, and so on.
26
to set the selected TX code
Transmitting
CLONING SOFTWARE

D TX code number edit

enables you to change the TX code con-
(TX Code CH)
tents within the allowable digits.
The group call function works by allowing you to edit a special
'group code' into the last 2 digits position of the SelCall ID
code.
To edit a TX code:
q Select the desired CB channel ('CB-XX') except for chan-
nels 5 and 35. (p. 11)
w Push [Top]
(Function)
(TX Code CH)
mode.
.
• Push [CH Up] or [CH Down] to select the desired TX code
channel, if desired.
e Push and hold
the TX code edit mode.
The editable digit starts blinking
r Push
(TX Code CH)
edited.
to enter the function mode, then push
to enter the TX code channel selection
for 2 sec. again to enter
(TX Code CH)
to select the desired digit to be