I Scanning Preparation - Icom IC-41S Instruction Manual

5
SCAN OPERATION
I
Scanning preparation
IC-41S scans all tagged channels, and can be selected so
the scan resume condition is a pause or timer scan.
Therefore, these items must be set before starting a scan
(except the repeater search scan). These items must be set
for each scan type (open, group and priority) independently.
DScan type selection
➥ Push
(Scan Mode)
scan type.
• Open, group and priority scans are available.
• "OPEN", "GROUP" or "PRIO" is displayed for 1 sec. when each
scan type is selected.
Open scan is selected.
Push
Group scan is selected.
Priority scan is selected.
18
several times to select the desired
Appears
Push
Appears
Appears
Push
DTag channel setting
q Select the desired scan type. (See at left.)
w Select the desired channel. (p. 11)
e Push and hold
(Scan Tag)
channel setting ON and OFF.
• "S" appears when the tag setting is ON (The channel is set as a
scan channel).
Appears
To speed up scanning:
For open scan, cancel the tag channel setting to skip unde-
sired channels such as usually busy channels.
For group scan, set only often-used channels as tag chan-
nels.
All memory channels may be set as tag channels by
default.
for 2 sec. to toggle the tag