Table of Contents
Advertisement
3. Adjusting Copy Density
The Auto Image Density function automatically adjusts the density of the copy
to keep dark backgrounds from appearing. This function is active when you
turn on the machine, or when you press the Stand-by/Clear Modes key or
Auto Image Density key. It can handle most copy jobs, but if copy density is
too dark or too light, adjust the density manually.
Lighter Copy
Select
Lighter
Lighter Copy
Select
Lighter
.
Darker
Auto-Density
Darker
Auto-Density
1. Press the Lighter or Darker key.
The Manual Image Density indica-
tor lights.
2. Adjust the density. Press the
Lighter or Darker key repeatedly
and move the Manual Image Den-
sity indicator to the desired density.
There are 26 manually selectable im-
age density levels, split into two ranges
of 13 levels each.
There are the "Normal" range (ID levels
1 – 13) and the "Lighter" range (ID lev-
els 14 – 26). To select the "Lighter"
range, press the Lighter key until the
Lighter Copy indicator turns on. To re-
turn to the "Normal" range, press the
Darker key until the Lighter Copy indi-
cator turns off.
6
Advertisement
Table of Contents
