Table of Contents
Advertisement
1. Main Copier, FW830
Configuration :
Copy Process :
Scanning :
Originals :
Original Size :
Copy Size :
Copying Speed :
First Copy :
Warm-up Time :
Multi-copy :
Automatic Reset :
Reproduction Ratio :
Toner Replenishment :
Paper Feeding :
Self-diagnostic Codes :
Power Source :
Power Consumption :
SPECIFICATIONS
Table top
Electrostatic transfer system
Original moving over a fixed fiber optics array
Sheet
Maximum length :
Maximum width:
Minimum length :
Minimum width :
Minimum:
Same as "Original Size"
17 feet 8.75 inches/minute
(5.4 meters; 7 cpm, D/A1 sideways)
21 seconds (D/A1 sideways)
Within 6.5 minutes (Room temperature 68
1 to 10 (D/A1 or smaller)
1 to 5 (E/A0)
2 minutes after copying is finished (can be set
by your service representative to 1, 3, 4, or 5
minutes, or to no auto reset).
1 : 1 ( 0.5%)
Cartridge system (750 g toner/cartridge)
Manual feed (sheet & roll feeders optional)
14 codes, displayed in copy counter
115 V, 60 Hz, 12A
Maximum :
Warm-up :
Stand-by :
Copy Cycle :
62
12 feet (3.6 m)
2 feet 11 inches (914mm)
10.1 inches (257 mm)
7.2 inches (182 mm)
letter
1.42 kW
1.25 kW
0.1 to 1.2 kW
1.42 kW
O
O
F, 20
C)
Advertisement
Table of Contents
