Table of Contents
Advertisement
HOW TO USE THIS BOOKLET
This manual contains detailed instructions on the operation and maintenance of
this copier. Please keep this manual in a handy place near the machine.
If you want to make a copy using the manual feed tray turn to page 3.
If you want to use the sheet feeder, turn to page 14.
If you want to use the roll feeder, turn to page 16.
If you want to copy originals that can't be bent, turn to "Using the Rear
Table" on page 11.
If you want to add toner or paper, turn to page 21.
If you want to make more than one copy at a time, turn to page 12.
If you want to stop copying, press the Stop or Clear/Stop key. See page 9
for details.
If something goes wrong, turn to page 32.
To get maximum versatility from the copier, all operators should carefully read
and follow the instructions in this manual.
And Remember...
Always wait for copying to finish before turning the copier off.
Insert paper and originals straight in the machine, not at an angle.
Depending on the size or type of the original, the original may skew during
repeat copying. If this happens, make copies one at a time.
For more Do's and Don'ts, turn to page 50.
Advertisement
Table of Contents
