Table of Contents
Advertisement
1. Original Guide
2. Original Tray
3. Upper Copy Guide
4. Indicator Panel
5. Original Table
6. Original Feed Unit
7. Operation Panel
8. Main Switch
9. Paper Feed Pressure
Lever
10. Sheet Feeder Release
Lever
11. Copy Paper Turn
Guide Cover
12. Roll Feeder Release
Lever
13. Roll Feeder Top
Cover
14. Paper Feed Roller
Cover
15. Roll Paper Cover
16. Lower Copy Guide
17. Roll Feeder
(Optional Equipment)
18. Lift Handle
19. Sheet Feeder
(Optional Equipment)
20. Manual Feed Table
21. Copy Paper Guide
22. Rear Cover
Adjust this guide to the proper original size and
then insert originals along this guide.
Originals are fed out here after making copies.
Completed copies are delivered here when the
upper copy exit is selected.
See " Indicator Panel ".
Place originals on this table to be fed into the
original feed unit.
Automatically transports originals to make cop-
ies.
Operator controls and indicators for the main
copier are located here.
Turns the main copier on or off.
Use this lever to adjust paper feed pressure.
Use this lever to pull out the sheet feeder.
Open this cover to remove misfed paper.
Use this lever to lift the roll cutter.
Open this cover to remove misfed paper.
Open this cover to remove misfed paper.
Roll paper is loaded inside of this cover.
Completed copies are delivered here when the
lower copy exit is selected.
Automatically cuts roll paper to the desired
length.
Use this handle to open the middle unit.
Automatically feeds copy paper.
Place copy paper on this table.
Adjust this guide to the proper copy paper size
and then insert copy paper along this guide.
Open this cover to remove misfed paper.
56
Advertisement
Table of Contents
