Table of Contents
Advertisement
ity
Clear/Stop
C
- If the original misfeeds -
8. Changing the Fusing Temperature
Some types of paper, such as heavy translucent paper and transparent film,
require a different fusing temperature. For these types of copy paper, leaving
the fusing temperature as it is would yield less than optimal copy quality.
The High setting is for heavy translucent paper, the Low one is for transparent
film. Standard paper requires the normal setting, with both the HIGH and LOW
indicators off.
Fusing
Temperature
High
y
Low
2. To reselect the number of copies,
press the Clear/Stop key again.
The Copy Counter indicator will
display 1.
To stop the machine without com-
pleting the copy cycle, press the
Stop key on the indication panel.
The original and the copy paper will
stop inside the machine and the
Original Misfeed indicator and Mis-
feed indicator will light. See " TROU-
BLESHOOTING " for instructions on
removing the original and copy pa-
per.
Press the Fusing Temperature key
to light the HIGH or LOW indicator,
or to turn both indicators off. The
Wait indicator lights.
The copier takes about 1 minute to
reach HIGH temperature.
The copier takes about 3 minutes to
reach LOW temperature.
10
Advertisement
Table of Contents
