Using The Rear Table - Ricoh FW830 Operating Instructions Manual

9. Using The Rear Table

Use the rear table to copy originals that can't or shouldn't be bent, such as
cardboard or paper between 0.0075 and 0.04 inch thick (0.19 and 1.00 mm). The
synchro cut and repeat copy functions can't be used with the rear table. Follow
the procedure outlined for manual feed, page 3, with these differences:
1. Lift the large lever on the right side
of the copier.
2. Reverse the original exit supports.
3. Set the original face down on the
table.
11