Table of Contents
Advertisement
6. Clearing the Modes
If you want to clear all the modes you have manually selected, use the Stand-
by/Clear Modes key. Pressing the Stand-by/Clear Modes key cancels the copy
density, number of copies, leading edge, and trailing edge margin settings.
Stand-by
Clear Modes
C
7. Canceling Copying
If you discover an error while copying is under way, press the Stop key or the
Clear/Stop key on the operation panel.
- If you make an error in operation -
ty
Clear/Stop
C
If the machine is idle for two minutes,
modes are cleared automatically. This is
called Auto Clear. For details on how to
change the two-minute delay refer to
"FUNCTIONS THAT CAN BE RESET".
1. Press the Clear/Stop key. After the
original and copy paper are fed out,
copying stops.
If you press the Clear/Stop key after
setting the original (before setting the
copy paper), the original will be fed out
on the original table.
9
Advertisement
Table of Contents
