3. Power Connection
Connect the power cord to a power source of 115 V, 60 Hz, 12A.
Do not set anything on the power cord.
Voltage must not fluctuate more than 10%.
Ground the copier properly to prevent accidents.
Avoid multiwiring.
Make sure the plug is firmly inserted in the outlet.
Make sure that the wall outlet is near the copier and easily accessible.
4. Access to Copier
Place the copier near a power source, providing clearance as shown.
Left
23.6 inches
(600 mm)
Back
23.6 inches
(600 mm)
Front
39.4 inches
(1000 mm)
53
Right
23.6 inches
(600 mm)