Table of Contents
Advertisement
4. Changing Copy Exit
You can change the copy exit direction to match the paper size. Use the lower
copy exit for larger copy paper. This will prevent paper from hindering copying
or from becoming crumpled.
Copy Exit
5. Changing Leading and Trailing Edge Margins
You can set a margin at the leading edge of the copy. Set the trailing edge
margin only when using the roll feeder.
Trailing Edge
Edge Erase
Set Edge
Ready
Wait
Pap
Press the Copy Exit key on the opera-
tion panel.
Select the paper exit to match the pa-
per size. Select the upper paper exit
for paper up to D size (22" x 34", A1).
Select the lower paper exit for paper
larger than D size.
You can set margins between 0.1 inch
(2.5 mm) and 8.5 inches (215 mm), in 0.1
inch steps. Follow the procedure below.
1. Press the Edge Erase key to select
the desired margin. The indicator
lights.
7
Advertisement
Table of Contents
