23. Copy Guide Wire
24. Rear Table Lever
25. Table
(Optional Equipment)
26. Exposure Glass
(not shown)
27. Middle Unit
(not shown)
28. Platen Roller
(not shown)
29. Used Toner Tank
(not shown)
30. Paper Tray
(not shown)
This guide wire leads completed copies to
the upper copy guide when the upper exit is
selected.
This lever is used for opening or closing the
rear table.
This table is specially made for installation
of the roll feeder.
Originals are scanned here.
Image is developed here.
Presses the original flat against the exposure
glass.
Used toner is collected in this tank.
Place sheets of paper on the paper set plate
inside this tray.
57