Ricoh MV310E Operator's Manual page 137

User Parameters (function 63) TECHNICAL REFERENCE
SW
12
-
Bits & Definition
Settings
2: Faxing & Report Toner Saving Qfj: 0 On: 1
EICONOMY PRINTIIU; MCltlE
Note:
If on, contrast will be set to "Normal" automatically, preserving image quality.
This is available when receiving fax messages and printing reports, but not
for copying or printing from a PC.
Further, messages sent to you in halftone mode will automatically turn off
toner saving to insure a clear image.
To make sure that the fax quality is acceptable with toner saving on, print a
few reports.
(Note: If the sender is using a machine made by another manufacturer, toner
saving will stay on and this could lower image quality.)
3, 4: Fax reception & PC printer Bit 3 4
density Normal: 0 0
PRINT DEN5ITY
Darken: 0 1
Lighten: 1 0
125