How To Set The Document - Ricoh MV310E Operator's Manual

FAXING
How to Set the Document
How to Set the Document
Setting the document in the Auto Document Feeder (ADF)
Carefully place the document
face up into the auto document
feeder. Then adjust the guides to
fit the width of the document.
Make sure that the display
changes as shown.
Note:Do not feed in more than 30 pages.
Do not stack documents in the feeder so that they exceed the load limit
marker.
Setting the document to the exposure glass
cl Lift up the top cover (make sure
you raise it by at lease 35", or
halfway) and place the first page
of your document face down on
the exposure glass.
Then lower the top cover.
The display will change as shown.