Zoning Merged - Qlogic SANbox 9000 Series Interface Manual

A

Zoning Merged

Displays the contents of the merged zone set, or saves the merged zone set to
the non-volatile zoning database.
Authority
Admin session for the Capture keyword.
Syntax
zoning merged
capture
Keywords
capture
Saves the merged zone set to the non-volatile zoning database. You must enter
the Zoning Save
keyword, this command displays the contents of the merged zone set.
Examples
The following is an example of the Zoning Merged command:
SANbox #> zoning merged
*********************************************************************
To permanently save the merged database locally, execute the
'zoning merged capture' command. To edit the merged database
use the 'zoning edit merged' command. To remove the merged database
use the 'zoning restore' command.
**********************************************************************
Merged (unsaved) Zoning Information
ZoneSet
-------
ZS1
The following is an example of the Zoning Merged Capture command:
SANbox (admin) #> zoning merged capture
This command will overwrite the configured zoning database in NVRAM.
Please confirm (y/n): [n] y
The merged zoning database has been saved.
59231-03 A
command afterwards to save your changes. If you omit this
Zone ZoneMember
---- ----------
Z1
10:00:00:c0:dd:00:b9:f9
10:00:00:c0:dd:00:b9:fa
Z2
10:00:00:c0:dd:00:b9:fb
10:00:00:c0:dd:00:b9:fc
15 – Command Reference
Zoning Merged
15-213