Qlogic SANbox 9000 Series Interface Manual page 25

A
To upload a file from the workstation to the switch, do the following
1. Enter the FTP command and the switch IP address or symbolic name.
>ftp 10.0.0.1
2. When prompted for a user and password, enter the FTP account name and
password (images, images).
user:images
password: images
3. Set binary mode and use the Put command to upload the file
(config_switch_169).
ftp>put config_switch_169 configdata
ftp>quit
59231-03 A
xxxxx bytes sent in xx secs.
2 – Command Line Interface Usage
Downloading and Uploading Files
2-9