Set Setup Radius - Qlogic SANbox 9000 Series Interface Manual
Stackable chassis switch
Hide thumbs
Also See for SANbox 9000 Series:
- Interface manual (446 pages) ,
- User manual (140 pages) ,
- Brochure (15 pages)
Table of Contents
Advertisement
15 – Command Reference
Set Setup Radius
Examples
The following is an example of the Set Setup RADIUS command:
SANbox (admin) #> set setup radius
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the attributes
for the server being processed, press 'q' or 'Q' and the ENTER key to do so.
If you wish to terminate the configuration process completely, press 'qq' or
'QQ' and the ENTER key to so do.
DeviceAuthOrder
UserAuthOrder
TotalServers
Server: 1
ServerIPAddress
ServerUDPPort
DeviceAuthServer
UserAuthServer
AccountingServer
Timeout
Retries
SignPackets
Secret
Do you want to save and activate this radius setup? (y/n): [n]
15-100
(1=Local, 2=Radius, 3=RadiusLocal) [Local]
(1=Local, 2=Radius, 3=RadiusLocal) [Local]
(decimal value, 0-5)
(dot-notated IP Address)
(decimal value)
(True / False)
(True / False)
(True / False)
(decimal value, 10-30 secs)
(decimal value, 1-3, 0=None)
(True / False)
(1-63 characters, recommend 22+) [**********]
S
[1
]
[10.20.11.8]
[1812
]
[True
]
[True
]
[False
]
[10
]
[0
]
[False
]
59231-03 A
Advertisement
Table of Contents
