Test Port - Qlogic SANbox 9000 Series Interface Manual
Stackable chassis switch
Hide thumbs
Also See for SANbox 9000 Series:
- Interface manual (446 pages) ,
- User manual (140 pages) ,
- Brochure (15 pages)
Table of Contents
Advertisement
A
Test Port
Tests individual ports using an offline or online test.
Authority
Admin session
Syntax
test port [port_number]
offline [loopback_type]
online
Keywords
[port_number]
The port to be tested. [port_number] can be 0–15 (IO0), 16–31 (IO2), 32–47
(IO3), 48–63 (IO4), 64–79 (IO5) 80–95 (IO6), 96–111 (IO7), or 112–127 (IO8).
offline [loopback_type]
Performs an offline test of the type given by [loopback_type] on the port given by
[port_number]. Use the
state before running the test. [loopback_type] can have the following values:
internal
Exercises the internal port connections.
external
Exercises the port and its transceiver. A transceiver with a loopback plug is
required for the port.
online
Exercises the port, transceiver, and device connections while the port is online.
This test does not disrupt communication on the port.
59231-03 A
Set Port
command to place the port in the diagnostics
15 – Command Reference
Test Port
15-185
Advertisement
Table of Contents
