Managing Groups; Create A Group; Delete A Group; Rename A Group - Qlogic SANbox 9000 Series Interface Manual

A
10.6

Managing Groups

Managing Groups consists of the following tasks:

Create a Group

Delete a Group

Rename a Group

Copy a Group
Add Members to a Group
Modify a Group Member
Remove Members from a Group
All of these tasks require an Admin session and a Security Edit session.
10.6.1
Create a Group
Creating a group involves specifying a group name and a group type. There are
three types of groups:
ISL group–secures connected switches
Port group–secures connected devices
MS group–secures management server commands
Enter the
following example:
SANbox (admin-security) #> group create group_port port
10.6.2
Delete a Group
Enter the
as shown in the following example:
SANbox (admin-security) #> group delete group_port
10.6.3
Rename a Group
Enter the
the following example:
SANbox (admin-security) #> group rename group_port port_1
59231-03 A
Group Create command to create a new port group as shown in the
Group Delete command to delete group_port from the security database
Group Rename command to rename group_port to port_1 as shown in
10 – Device Security Configuration
Managing Groups
10-11