Qlogic SANbox 9000 Series Interface Manual page 282

15 – Command Reference
Show Blade
Examples
The following is an example of the Show Blade command. If system faults exist,
they will be listed at the bottom of the display with a message informing you of
fault conditions. If only blade faults exist, only the message is displayed.
[FAULTS:2] SANbox #> show blade
Blade
ID
-----
IO0
IO1
IO2
IO3
IO4
IO5
IO6
IO7
+CPU0
CPU1
PS0
PS1
FAN0
FAN1
MP
System Faults: FAN_FLOW_MISMATCH,FAN0_MISSING
One or more fault conditions exist, contact your authorized
maintenance provider (see 'show faults' for details).
15-116
Blade Port Admin
Type Range State
---- ----- -----
FC4G16 0-15 Online
* * Online
FC4G16 32-47 Online
* * Online
FC4G16 64-79 Online
* * Online
FC4G16 96-111 Online
* * Online
CPU N/A Online
CPU N/A Online
PSBF N/A N/A
PSFB N/A N/A
* N/A N/A
FANFB N/A N/A
MP N/A N/A
Oper Fault Temp
State Status Status
----- ------ ------
Online None Normal
NotInst * *
Online None Normal
NotInst * *
Online None Normal
NotInst * *
Online None Normal
NotInst * *
Online None Normal
Online None Normal
N/A None N/A
N/A None N/A
N/A * N/A
N/A None N/A
N/A None N/A
S
Voltage
Status
------
Good
*
Good
*
Good
*
Good
*
Good
Good
N/A
N/A
N/A
N/A
N/A
59231-03 A