Upgrading The System Memory (Ram) - EUROCOM Notebook User Manual

Upgrading The Computer
6
Figure 6 - 8
Component Bay
Cover Screws

6 - 10 Upgrading the System Memory (RAM)

Upgrading the System Memory (RAM)
The computer has three memory sockets for 204 pin Small Outline Dual In-line
(SO-DIMM) DDR III (DDR3) type memory modules (see
2). The total memory size is automatically detected by the POST routine once you
turn on your computer.
Removing the Primary System Memory (2 memory sockets)
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the component bay cover and remove screws
1 2
"Memory" on page C -
-
1 4
3 4