Upgrading The System Memory (Ram) - EUROCOM Notebook Manual

Upgrading The Computer
6
Figure 6 - 8
Component Bay
Cover Screws

6 - 8 Upgrading the System Memory (RAM)

Upgrading the System Memory (RAM)
The computer has two memory sockets for 204 pin Small Outline Dual In-line (SO-
DIMM) DDR III (DDR3) type memory modules (see
The total memory size is automatically detected by the POST routine once you turn
on your computer.
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the component bay cover and remove screws
1
4
5
"Memory" on page C -
1
2 3
7
6
3).
- .
7