3Rd Party Bluetooth Networking Setup - EUROCOM Notebook User Manual

3rd Party Bluetooth Networking Setup

This information applies to the combo Bluetooth and WLAN module only.
1. Make sure the Bluetooth module is powered on.
2. Double-click the My Bluetooth application on the desktop (or access it from the
Programs/All Programs menu).
3. Click My Bluetooth Settings (see
4. Click Network Settings (make sure the Bluetooth module is powered on.
5. Click Enable Bluetooth Network and click OK.
6. A message will appear in the notification area to confirm that the network driver
has been installed.
Figure 7 - 30 on page 7 - 52).
Bluetooth Module 7 - 55
Modules
Figure 7 - 33
Network Settings
7