EUROCOM Notebook User Manual page 212

Troubleshooting
Problem
The TouchPad doesn't
work.
I am sliding my finger up
and down on the right
side of the TouchPad to
scroll a Window and the
TouchPad does
respond.
The system freezes or
the screen goes dark.
The system never goes
8
into a power saving
mode.
The Wireless
Bluetooth/PC Camera
modules cannot
detected.
The Wireless
Bluetooth/PC Camera
modules cannot
configured.
8 - 10 Problems & Possible Solutions
The Touchpad has been disabled. Press the Touchpad toggle (Fn + F1) key combination (make
sure you have installed the Touchpad driver.
There are different TouchPad versions available on this computer, and this version requires
tapping/holding to scroll. Either tap repeatedly, or hold the finger down, at the top or bottom right
of the touchpad (depending on the scrolling direction required) to scroll the window.
not
The system's power saving features have timed-out. Use the AC/DC adapter, press a key on the
keyboard, or press the sleep (Fn + F4) key combination, or press the power button if no LEDs are
lit.
Power Options features are not enabled. Go to the Windows Power Options menu and enable
the features you prefer (see
enabled Hibernate mode from the control panel.
LAN/ The modules are off. Check the appropriate Touch Sensor indicator to see if the modules are on
or off (see "Touch Sensor Instant Keys" on page 1 -
be then press the appropriate touch sensor instant key/function key combination in order to enable
the modules.
LAN/ The driver(s) for the module(s) have not been installed. Make sure you have installed the driver
for the appropriate module (see the instructions in
be module).
Possible Cause - Solution
"Power-Saving States" on page 3 -
9). If the LED indicator is not illuminated,
Chapter 7 "Modules"
6). Make sure you have
for the appropriate