Removing And Installing The Processor - EUROCOM B7110 Service Manual

Removing and Installing the Processor

Processor Removal Procedure
1. Turn off the computer, remove the battery
2. The CPU heat sink will be visible at point
,
3. Remove screws , ,
6
5 4
4. Carefully lift up the heat sink
a.
b.
2
5
1
3
(page 2 - 5) and the component bay cover
(Figure 7a) on the mainboard.
A
, ,
(Figure 7b), the reverse order indicated on the label
3 2 1
(Figure 7c) off the computer.
B
c.
A
4 6
Processor Removal
(page 2 - 8).
a. Remove the cover and
.
b. Remove the screws in
c. Remove the heat sink.
B
Removing and Installing the Processor 2 - 11
Disassembly
Figure 7
Iocate the heat sink.
the order indicated.

B. Heat Sink
• 6 Screws