Removing The Wireless Lan Module - EUROCOM M560A Service Manual

Disassembly

Removing the Wireless LAN Module

Figure 4
Wireless LAN
1. Turn off the computer, and turn it over remove the battery
Module Removal
2. Locate the bay cover and remove screws (
3. Remove the bay cover
a. Remove the screws and
4. Carefully disconnect cable
the cover.
5. The Wireless LAN Module
b. Disconnect the cable
and pull the release
latches.
c. The WLAN module will
pop up.
d. Remove the Wireless
LAN module.
Note: Make sure you re-
connect the antenna ca-
ble to the "Main" socket
(Figure 4b).
6. Bay Cover
10.Wireless LAN Module
• 5 Screws
2 - 8 Removing the Wireless LAN Module
.
6
, then gently pull the two release latches (
7
(Figure
10
a.
b.
1
2
3
6
5
4
c.
(page 2 - 5).
- ).
1 5
8
c) will pop-up, and you can remove it.
d.
8
7
9
10
- ) on the sides of the module socket.
9
10