Table of Contents
Advertisement
DES-7000/DES-7100 Layer 2 Switch User's Guide
Factory Reset
Figure 6- 64. Factory Reset to Default Value window
A remote reset returns the Switch to the initial parameters set at the factory. You may opt to save the
current IP settings for the Switch. Click Reset to Factory Default to reset the Switch. The default IP
settings for the Switch are 10.90.90.90/255.0.0.0 and are configured for manual setting.
The CLI command to reset Switch configuration to the default settings is reset.
Restart System
Figure 6- 65. Restart System window
To perform a reboot of the Switch, which resets the system, click the Restart button.
The CLI command to restart is reboot, CLI allows the option of restarting an individual slot.
Using the Web-based Management Software
100
Advertisement
Table of Contents
