Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Factory Reset to Default Value (which sets all of the
Switch's parameters to what they were when the Switch
was delivered from the factory).
Restart System
To perform a system reset, choose Restart System from the
main menu. Please note there is no confirmation query
before the system is rebooted.
Figure 6-29. Restart System screen
Factory Reset to Default Value
Before performing a factory reset, be absolutely certain
that this is what you want to do. Once the reset is done, all
of the Switch's settings stored in NV-RAM (including
TCP/IP
parameters, SNMP
parameters,
the
76
Using the Console Interface
Advertisement
Table of Contents
