Resetting The Switch; Restart System - D-Link DES-3225G Series User Manual

24-port NWay Ethernet Switch User's Guide
Figure 6-63. Switch History screen
The switch history entries are listed sequentially from the last time the Switch was rebooted. Use the
following keys to move around the screen above: N – Page down, P – Page up, B – Begin, E – End, and C –
Clear Log. CTRL+R will refresh the screen.

Resetting the Switch

You can use the console interface to reset the Switch, either performing a Restart System (which restarts the
Switch and is identical to powering the Switch off and on again), or a Factory Reset (which sets all of the
Switch's parameters to what they were when the Switch was purchased).

Restart System

To perform a system reset, choose Restart System from the main menu--a confirmation query will be offered
before the system is rebooted.
Using the Console Interface 101