Stitch Density On One Side - Kenmore 385.19153 Owner's Manual

[ _ STEP 2
(_ Press the memory button.
The machine will bartack and sew down
the right side.
Stop the machine when you are directly
opposite the first stitch on the left hand
side.
[ I-'-I StEP3 j
Press the memory button.
The machine will auto-lock the end of
the buttonhole and stop. Keep the foot
contro] depressed until the machine
stops by itself.
= Stitch density on one side
J
A
For condition A:
Left side stitches too far apart (see
above}.
Turn the feed balance dial slightly
toward" + "o Use the large screw driver
Jnyour accessory box.
B
For condition B:
Right side stitches too far apart (see
above).
Turn the feed balance dial slightly
toward "-"
After adiusting the feed balance dial, sew another test buttonhole to be sure your
adjustment is correct,
NOTE: Remember to return the feed balance dial to the standard mark ( D )
when you have completed the buttonholes.
122