Darning Small Rips - Kenmore 385.19153 Owner's Manual

•
Darning small rips • Adjusting evenness of darning
f ", f
ItllIIl)_]itIIII
tll_IlI{tilltl!l
IllII_tJ{llll!
_YYIYYYYt
Small rips can be repaired by programming
the machine to sew a shorter darn,
Begin the first row of the darn stopping the
machine when you reach the bottom edge of
the rip. For example, you may only need to
sew 5 stitches. Press the reverse button but
do not hotd it. The machine will now complete
the 16 rows with 5 stitches in each row and
stop automatically.
It is simple to make a darning of same size
as the first one.
Press memory button when you have
completed the first darning.
Depress the foot control. For a second
darning of the same stze.
Pressing mirror image button instead of
memory button wil! give the same resuit but
the darning is made in the reverse sequence,
m d3)
m
When the left side
_s lower
When the right side
_s Iowe_,
Select dl or d2 to SelecL d4 e_ d5 to
give an even stitch, g_ve an even sti|ch.
$
[29 _ IT d]} i, 29 _ _, d4l
[29 _ _ d2l [29 _ _ dS]
If there is a difference in height between the starting point (left side) and the end point (right
side) of darning, make adjustment by pressing the + or - button.
Press I L_E_4_T_ Jbutton, and adiust between dl and d5.
Upon pressing
the
I LENGTHIbutton the selection is displayed on the screen.
!!1