Kenmore 385.19153 Owner's Manual page 129

Manual buttonholing
f
Set the machine
Ir' BH1 Foot,. Jl
Thread tension; 5
J: Sliding buttonhoEe loot
NOTE:
Do not put finger, screw dnver or any
other obiect near or under the sensor
when sewing buttonholes by using
sliding buttonhole foot J, Otherwise the
sewtng procedure in the pattern
_ndicator may advance to the next
steps,
Ca.
b.
C_
(_)ao
i-J S EP l
b.
O.
NOTE:
Carefully mark the buttonhole length on your
garment,
Change to the sliding buttonhole foot,
insert the garment under the foot with the
buttonhole marking running toward you. Slide
both threads to the left,
Move the slider (A) away from you so that the
bottom mark (C) on the slider meets the start
mark (B).
Line up the markings on the foot with the bottom
mark on your garment,
Lower the presser foot and.press BH1 (bar-tack)
button,
The markings on the slider are made in
centimeters
(&) The machine will barrack and sew up the teft s{de of
the buttonhole.
Stop the machine at the top mark,
_' Steps 2 and 3 are continued on page 122,
!19