Connecting The Server To Power - Nortel CALLPILOT Installation And Configuration Manual

Installing the server and connecting the peripheral devices

Connecting the server to power

Before you begin
Ensure that proper power and grounding are available for all the power
outlets serving the CallPilot server and its associated peripherals. Power for
these devices must be wired and fused independently of all other receptacles
and referenced to the same ground as the PBX system.
A qualified electrician must implement the single-point ground reference as
required among the power outlets of the CallPilot server, its associated
peripherals, and the power outlets of the switch.
Provide a sufficient number of properly grounded power outlets or power
bars for all equipment.
62
Standard 1.01
CallPilot