Nortel CALLPILOT Installation And Configuration Manual page 27

November 2005
Network requirements
Appropriate networking equipment must be available for both the CLAN
and ELAN.
The CLAN and ELAN must be properly configured for correct CallPilot
operation. To ensure correct configuration, Nortel Networks recommends
that you consult a network specialist.
ATTENTION
Remote access connectivity
The RS-232 COM1 connector on the rear of the 703t server provides the
connection to an external dial-up modem. The modem allows administrators
and technical support personnel to administer the 703t server from a remote
location.
pcAnywhere is used to establish a remote access connection to the server.
Part 2: 703t Server Hardware Installation
For important considerations about using the ELAN in
your network, see "About the ELAN" in CallPilot
Installation and Configuration Part 1: Installation and
Maintenance Overview (555-7101-210).
703t server description
27