Nortel CALLPILOT Installation And Configuration Manual page 58

Installing the server and connecting the peripheral devices
3 At the switch, connect the ELAN network cable to an MAU (Ethernet)
transceiver. Then complete the connection from the transceiver to the
switch.
.
What's next?
IF the server will
be connected to a CLAN
not be connected to a CLAN
58
DANGER
Risk of fire hazard
The NTRH9069 MAU is not suitable for installation in ducts,
plenums, or other spaces used for environmental air. Do
not install it above a false ceiling or below a raised floor,
unless it can be confirmed that these spaces are not used
to convey environmental air.
THEN
continue with page 59.
continue with installing the software
feature key adapter (dongle). See page
60.
Standard 1.01
CallPilot