Connecting Peripherals To The Server - Nortel CALLPILOT Installation And Configuration Manual

November 2005

Connecting peripherals to the server

Introduction
This section describes how to connect the monitor, keyboard, mouse, and
modem to the server.
Rear panel
The peripheral device connection panel at the back of the server provides a
legend that shows the symbol for each peripheral device and which
connector to use.
.
Part 2: 703t Server Hardware Installation
Installing the server and connecting the peripheral devices
CAUTION
Risk of system failure
You can install or use only Nortel Networks-approved
peripheral devices on your server. Installation or use of
unapproved peripheral devices can result in system failure.
53