Nortel CALLPILOT Installation And Configuration Manual page 52

Installing the server and connecting the peripheral devices
DIP Default
switch setting
6 OFF
7 OFF
8 ON
What's next?
Continue with "Connecting peripherals to the server" on page 53.
52
Change
to Function
OFF Carrier Detect (CD) override
OFF: The modem sends a CD signal when it
connects with another modem; it drops the
CD on disconnect.
ON: CD is always ON (override).
OFF Power-on and ATZ reset software defaults
OFF: Loads Y or Y1 configuration from
NVRAM.
ON: Loads &F0-Generic template from
read-only memory (ROM).
ON AT command set recognition
OFF: Disables command recognition (dumb
mode).
ON: Enables recognition (smart mode).
Standard 1.01
CallPilot