Nortel CALLPILOT Installation And Configuration Manual page 17

November 2005
The table below describes the parts that are identified in the preceding
diagram:
Part
AC power supply connector
(450 W non hot-swap power supply)
USB connectors
PS/2 keyboard connector
PS/2 mouse connector
COM1 serial port connector (9-pin)
Parallel port connector (25-pin)
Monitor connector (15-pin)
10/100/1000Base-T CLAN network connector for
Customer LAN connection (NIC2 1 GB)
Note: For more information, see
"LAN connectivity" on page 26.
10/100Base-T ELAN network connector for
Meridian 1/Succession 1000 connection
(NIC1 10/100 MB)
Note: For more information, see
"LAN connectivity" on page 26.
PCI slots (6)
Four slots are 100 MHz 3.3 V 64-bit PCI slots.
Two slots are 33 MHz 5 V 32-bit PCI slots.
Note: For more information, see
"Slot assignments" on page 19.
COM2 serial port connector slot (not installed)
Part 2: 703t Server Hardware Installation
703t server description
Color
Not applicable
Not applicable
Purple
Green
Teal
Pink
Blue
Not applicable
Not applicable
Not applicable
Teal
17