Attendant Blocking Of Dn - Nortel 1000 Features And Services Fundamentals

188 Call Forward/Hunt Override Via Flexible Feature Code
Operating parameters
The Call Forward/Hunt Override FFC can only be used in pre-dial mode
from a set (for instance, it must be dialed before dialing the DN that has Call
Forward All Calls, Intercept Call Forward, Call Forward No Answer, Internal
Call Forward, Hunt, or Make Set Busy active).
The Call Forward/Hunt Override FFC can only be dialed from its own node
(that is, it must be dialed before any trunk access code).
On an ABCD set the Call Forward/Hunt Override FFC can only be
configured as a pre-dial FFC (ABCD sets are a type of German telephone).
Call Forward/Hunt Override FFC can only be used against extensions with
one of the following type: HOT/MCN/MCR/SCN/SCR/Basic Rate Interface
(BRI) DNs and analog (500/2500 type) telephones.
It is not possible for BRI extensions to dial a Call/Forward Hunt Override
FFC.
The Call Forward/Hunt Override Via FFC feature can only be used in
standalone and MCDN environments. If no MCDN links are involved, no
information about Call Forward/Hunt Override is passed on to other nodes.
To get the functionality of Call Forward/Hunt Override Via FFC in an MCDN
environment these enhancements must be integrated in the originating
node, terminating node and any intermediate nodes.
Feature interactions

Attendant Blocking of DN

Using Call Forward/Hunt Override FFC after activation of ABDN is not
allowed. Any attempt is canceled and overflow tone is returned.
Automatic Call Distribution
Automatic Call Distribution (ACD) DNs are not overridden by Call
Forward/Hunt Override Via FFC. Any attempt is canceled and access denied
treatment is returned. Individual DNs on an ACD set are overridden by Call
Forward/Hunt Override Via FFC with the same limitations as for other sets.
Attendant Barge-in
Attendant Busy Verify
Attendant Break-in
Using Call Forward/Hunt Override Via FFC after activation of Barge-in,
Busy Verify or Break-in is not allowed. Attempts is canceled and overflow
tone is returned.
Copyright © 1994–2008, Nortel Networks
.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008